Round Regular Column Silicone Soap Mold

Craft circular soap faster with this Crafter's Choice® column soap mold. Once the soap has hardened, remove it from the mold and slice into bars. You can also embed smaller soap columns into this mold; fancy designs made simple

Melt & Pour Soap: Close the mold by firmly pressing the edges together. For added safety, clamp the edges. Support the mold with two flat objects, such as two mitre boxes on their sides. Slowly pour melted soap no hotter than 130ºF into mold. Allow the soap to harden then open the mold and remove soap. Trim edges with a potato peeler or spatula, then slice into bars. 

Cold Process Soap: Close the mold by firmly pressing the edges together, and clamp the sides. Support the mold with two flat objects such as two mitre boxes, on their sides. Slowly pour traced soap into mold. After at least 24 hours, remove soap from the mold with gloved hands. If desired, trim edges with a potato peeler or spatula. Slice into bars and allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster. 

Hot Process Soap: Close the mold by firmly pressing the edges together, and clamp the sides. Scoop hot process soap into the mold. Gently tap the mold onto the counter to remove air pockets. Allow soap to cool and harden. (This can take up to 48 hours.) Open mold and remove soap loaf. If desired, trim edges with a potato peeler or spatula. Slice into bars. 

Care: Hand wash mold in warm, sudsy water